LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement (L47) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power steering pulley to the power steering pump using J 25033-C. 
    Fig 1: Installing Power Steering Pulley
    G01581716Courtesy of GENERAL MOTORS CORP.
  2. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 in).
  3. Install the power steering pump. Refer to Power Steering Pump Replacement (LX5)  or Power Steering Pump Replacement (L47)  .
    Fig 2: Identifying Axial Tolerance Of Power Steering Pulley On Power Steering Pump
    G01581717Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals