LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 625 (Anti-Lock Brake System) >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Mass Air Flow/Intake Air Temperature (MAF/IAT) sensor electrical connector.
  2. Loosen the air cleaner intake and MAF/IAT assembly clamps from the throttle body side and from the air cleaner cover side.
  3. Remove the air cleaner intake and MAF/IAT assembly from the vehicle.
  4. Separate the air cleaner intake duct from the MAF/IAT sensor.
scientia non olet · About LEMON Manuals