LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 625 (Anti-Lock Brake System) >> Diagnostic Information And Procedures >> DTC C1295: Brake Lamp Switch Circuit Open >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

The stop lamp switch input voltage is between 2.1 volts and 5.3 volts for 2 seconds.