Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Chevrolet Monte Carlo and 2002 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Automatic Transmission Control Lever Screw | 20 N.m | 15 lb ft |
| Linear Shift Assembly Screws | 3.5 N.m | 31 lb in |
| Steering Column Intermediate Steering Shaft Lower Pinch Bolt | 48 N.m | 35 lb ft |
| Steering Column Intermediate Steering Shaft Seal Bolts | 3 N.m | 27 lb in |
| Steering Column Intermediate Steering Shaft Upper Pinch Bolt | 48 N.m | 35 lb ft |
| Steering Column Lower Trim Cover Screws | 3.5 N.m | 31 lb in |
| Steering Column Mounting Bolts (Tighten in Sequence) | 24 N.m | 18 lb ft |
| Steering Column Support Assembly Torx™ Head Screws | 17 N.m | 13 lb ft |
| Steering Column Upper Trim Cover Screws | 1.5 N.m | 13 lb in |
| Steering Wheel Shaft Nut | 45 N.m | 33 lb ft |
| Turn Signal and Multifunction Switch Screws | 7 N.m | 62 lb in |