Shift Lock Solenoid: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, and 2002 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Disable the SIR system. See AIR BAG DEACTIVATION PROCEDURES article in GENERAL INFORMATION. Remove the knee bolster. See KNEE BOLSTER . Remove the body control module bracket. See appropriate BODY CONTROL MODULES article in ACCESSORIES & EQUIPMENT.
Place the shift lever clevis into the Neutral position. Disconnect the electrical connector.
Use a small screwdriver to pry the shift lock actuator away from the steering column jacket assembly and the cable shift cam assembly. See Figure . Remove the shift lock actuator.