LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 613 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Center Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat belt buckle to the front seat track.
    Fig 1: Identifying Center Front Seat Belt Buckle
    G01756494Courtesy of GENERAL MOTORS CORP.

    Important:  The rivet is only used for installation alignment.

  2. Install the new rivet to secure the seat belt buckle to the rear of the front seat track.
  3. Install the front seat. Refer to SEAT REPLACEMENT - SPLIT BENCH .