LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (Seat System) >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Rear (Luxury Y91) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat cushion pad.
  2. Install the seat cushion cover to the seat cushion pad.
  3. Install the hog rings that retain the seat cushion cover to the seat cushion frame located at the rear edge of the seat frame.
    Fig 1: Installing Seat Cushion Pad & Cover
    G01737265Courtesy of GENERAL MOTORS CORP.
  4. Install the J-hooks that retain the seat cushion cover to the seat cushion frame.
  5. Install the rear storage tray to the seat. Refer to Storage Tray Replacement - Rear (Luxury Y91) .
  6. Install the bench seat and risers in the vehicle. Refer to Seat Replacement - Rear Bench (All Except Luxury)  or Seat Replacement - Rear Bench (Luxury Y91)  .
Fig 2: Installing J-Hooks Retaining Seat Cushion Cover
G01737266Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals