LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (Seat System) >> Repair Instructions >> Seat Back Cover and Pad Replacement - Rear (Luxury Y91) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.

Important:  For the best finished appearance, proceed as follows when attaching the seat back cover to the pad:

  1. Install the seat back cover and pad to the seat back.
    1. Center the seat back cover on the pad.
    2. Starting at the top and working down the sides, apply pressure along the break line in order to help attach the seat back cover to the J-hook to the frame and attach the hook and loop.
  2. Install the seat back to the frame and attach.
  3. Install the armrests. Refer to Armrest Replacement - Rear Seat (All Except Luxury)  or Armrest Replacement - Rear Seat (Luxury Y91)  .
  4. Install the headrests. Refer to Head Restraint Replacement (Luxury (Y91)) .
  5. Install the rear bench seat to the vehicle. Refer to Seat Replacement - Rear Bench (All Except Luxury)  or Seat Replacement - Rear Bench (Luxury Y91)  .
Fig 1: Installing Rear Seat Back Cover & Pad (Luxury Y91)
G01737272Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals