LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Stoplight Switch >> Installation

Stoplight Switch: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the electrical connector on the stoplight switch (1). See Fig 1 .
  2. Position the stoplight switch (1) on the pushrod (2) and install on the brake pedal pin. See Fig 1 .
  3. Install the pushrod retainer (3) to the brake pedal pin (4). The retainer will snap into place. See Fig 1 .
    Fig 1: Exploded View Of Stoplight Switch
    G00083431Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals