LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Power Brake Booster >> Removal

Power Brake Booster: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake.
  2. Remove the master cylinder. See MASTER CYLINDER  .
  3. Disconnect the vacuum hose from the vacuum booster and from the engine.
  4. Remove the left closeout/insulator panel.
  5. Remove the pushrod retainer (3) from the brake pedal pin (4). See Figure .
  6. Remove the stoplight switch (1) and the pushrod (2) from the brake pedal pin (4). See Figure .
  7. Remove the vacuum booster mounting nuts.
  8. Remove the vacuum booster assembly.
  9. Remove the gasket.
scientia non olet · About LEMON Manuals