LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Front Disc Brake Splash Shield >> Installation

Front Disc Brake Splash Shield: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the splash shield.
  2. Install the splash shield retaining bolts, same as wheel hub and bearing.
  3. Install the front hub and bearing assembly. See WHEEL HUB, BEARING, AND SEAL REPLACEMENT in appropriate FRONT SUSPENSION article.
  4. Install the tire and wheel assembly. Lower the vehicle.
scientia non olet · About LEMON Manuals