LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Pedal >> Removal

Brake Pedal: Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the closeout/insulator panel.
  2. Remove the stoplight switch from the brake pedal. See STOPLIGHT SWITCH  under REMOVAL & INSTALLATION.
  3. Remove the brake pedal pivot bolt and discard the bolt.
  4. Remove the brake pedal.
  5. Inspect the brake pedal pivot bushing for damage or wear.
scientia non olet · About LEMON Manuals