Brake Specifications
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE SPECIFICATIONS
| Application |
In. (mm) |
| Front Brakes |
| Rotor |
| Discard Thickness |
1.08 (27.5) |
| Minimum Allowable Thickness After Refinish |
1.13 (28.8) |
| Thickness (New) |
1.14 (29.0) |
| Maximum Allowable Lateral Runout |
0.002 (0.051) |
| Maximum Allowable Scoring |
0.059 (1.50) |
| Maximum Allowable thickness Variation |
0.001 (0.025) |
| Rear Brakes |
| Rotor |
| Discard Thickness |
0.728 (18.50) |
| Minimum Allowable Thickness After Refinish |
0.735 (19.64) |
| Thickness (New) |
0.787 (20.0) |
| Maximum Allowable Lateral Runout |
0.002 (0.051) |
| Maximum Allowable Scoring |
0.059 (1.50) |
| Maximum Allowable thickness Variation |
0.001 (0.025) |
HYDRAULIC BRAKE SPECIFICATIONS
| Application |
Specification |
| Pressure Modulator Bleeder Valves |
80 In. Lbs. (9 N.m) |
| Caliper Bleeder Valve, Front |
115 In. Lbs. (13 N.m) |
| Caliper Bleeder Valve, Rear |
97 In. Lbs. (11 N.m) |
| Brake System Flushing |
| Brake Fluid Volume From Brake Pressure Modulator Bleeder Valves |
4 oz. (118 ml) |
| Fluid Volume From Brake Calipers |
8 oz. (235 ml) |
| Brake System Pressure Bleed |
| Initial Pressure Adjustment Setting, Leak Testing Hydraulic Brake System |
10 Psi (70 kPa) |
| Pressure Bleed Procedure Setting |
35 Psi (240 kPa) |
| Brake Pedal Maximum Travel |
| Vacuum Power Assist |
2.4 In. (61 mm) |