LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 608 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Rocker Panel (Luxury Y91) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the push pin retainers from the bottom of the rocker panel molding.
  2. Tilt the lower portion of the rocker panel molding out away from the vehicle.
  3. In order to remove the rocker panel molding from the vehicle, carefully lift up the molding.
    Fig 1: Removing Push Pin Retainers
    G01736733Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals