LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Upper Pillar >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat belt from the vehicle. Refer to SEAT BELT REPLACEMENT - FRONT .
  2. Grasp and gently pull the garnish molding in order to release the retaining clips.
  3. Remove the front door upper pillar garnish molding from the vehicle.
  4. Inspect the front door upper pillar garnish molding for broken or missing retaining clips.

Replace the molding as needed.

Fig 1: Removing Front Seat Belt
G01737355Courtesy of GENERAL MOTORS CORP.