LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Side Door Opening Frame >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the side door opening frame garnish molding to the vehicle.
  2. Press on the side door opening frame garnish molding in order to engage the retaining clips.
  3. Install the passenger side front corner garnish molding. Refer to Garnish Molding Replacement - Right Side Front .
  4. Install the front door upper pillar garnish molding. Refer to Garnish Molding Replacement - Upper Pillar .
    Fig 1: Installing Garnish Molding Components (Side Door Opening Frame)
    G01737352Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals