LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (Instrument Panel, Gauges & Console) >> Repair Instructions >> 12-Volt Power Supply Replacement (Luxury Y91) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the instrument panel (IP) extension. Refer to Instrument Panel (I/P) Extension Replacement .
  3. Disconnect the electrical connectors (1) from the 12-volt power supply socket (2).
  4. Remove the retaining ring (3) from the 12-volt power supply socket by unscrewing the ring.
  5. Remove the 12-volt power supply socket from the IP extension.
    Fig 1: Removing 12-Volt Power Supply
    G01736588Courtesy of GENERAL MOTORS CORP.