LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 605 (Lighting Systems) >> Repair Instructions >> Underhood Lamp Replacement (Base) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the electrical connector from the underhood (UH) lamp.
    WARNING: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
  2. Drill out the rivets (2) that retain the underhood lamp (1) to the hood.
    Fig 1: Drilling Out Rivets
    G01736197Courtesy of GENERAL MOTORS CORP.