LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 605 (Lighting Systems) >> Repair Instructions >> Repeater Lamp Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push the light assembly (2) towards the front of the vehicle while gently prying the rear edge of the light assembly away from the fender in order to remove the light assembly.
  2. Remove the bulb and socket from the light assembly (3) by turning the socket 1/4 turn counterclockwise.
  3. Remove the bulb (1) from the socket.
    Fig 1: Removing Bulb & Socket
    G01736225Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals