LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 605 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal Lamp Replacement (RPO X88/Z88) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws (4) that retain the park/turn signal lamp to the radiator grille.
  2. Remove the park/turn signal lamp (3) from the radiator grille.
  3. Disconnect the bulb socket(s) (1) from the park/turn signal lamp by turning the bulb sockets in a counterclockwise direction.
  4. Remove the bulb(s) (1) from the socket.
    Fig 1: Removing Park/Turn Signal Lamp (RPO X88/Z88) Components
    G01736231Courtesy of GENERAL MOTORS CORP.