LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 605 (Lighting Systems) >> Repair Instructions >> Door Jamb Switch Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector (2) of the door jamb switch.
  2. Squeeze together the tangs of the door jamb switch.
  3. Push the switch (1) through the center pillar.
  4. Connect the battery negative cable.
    Fig 1: Connecting Electrical Connector
    G01736170Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals