LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Power Brake Booster Check Valve >> Installation

Power Brake Booster Check Valve: Installation

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the power brake booster hose at the engine (on 4.8L, 5.3L, 6.0L engines).
  2. Connect the power brake booster hose at the engine (4.3L).
  3. Install the manifold sight shield (on 4.8L, 5.3L, 6.0L engines).
  4. Install the power brake booster check valve to the hose. Install the power brake booster hose clamp to the check valve. Install the power brake booster check valve to the power brake booster.
scientia non olet · About LEMON Manuals