LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Release Handle Assembly >> Removal

Park Brake Release Handle Assembly: Removal

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the release cable from the brake lever. Disconnect the cable from the retainer on the brake lever. Remove the park brake release lever handle mounting bolt.
  2. Remove the release handle from the instrument panel retainer. Remove the release handle and cable from the vehicle. Note the routing of the cable as you remove the park release handle assembly from the vehicle.