LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Master Cylinder Reservoir >> Installation

Master Cylinder Reservoir: Installation

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the new O-rings and the reservoir-to-housing fittings with clean brake fluid. Insert the O-rings into the grooves in the reservoir. Make sure that the O-rings are properly seated.
  2. Install the reservoir to the master cylinder body. Use your hand in order to press the reservoir straight down into the body. Install the diaphragm. See Figure . Install the cover.
  3. Install the master cylinder.
scientia non olet · About LEMON Manuals