LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Pedal Assembly >> Removal

Brake Pedal Assembly: Removal

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the stoplight switch and power brake booster pushrod assembly from the brake pedal pin. See STOPLIGHT SWITCH  .
  2. Remove the instrument panel harness from the brake pedal bracket. Remove the bolt to the upper brake pedal bracket.
  3. Remove the nuts from the studs on the power brake booster. Remove the brake pedal bracket from the vehicle.