Section 60 (Disc Brakes & Drum Brakes): Overhaul: Notes
WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Do not hone master cylinder bore. Honing destroys hardened surface, causing premature piston seal failure. If bore surface is rough or pitted, replace master cylinder.
NOTE:
Required Tools: Piston Ring Compressor (J-24548), 75 mm Boot Seal Installer (J-36474), 80 mm Boot Seal Installer (J-36475) and 86 mm Boot Seal Installer (J-38453).