LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 599 (Engine Mechanical - 3.8L (Unit Repair)) >> Repair Instructions >> Drive Belt Idler Pulley Bracket Installation (L67)

Drive Belt Idler Pulley Bracket Installation (L67)

WARNING: This page is about a different car, the 2002 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive belt idler pulley bracket.
  2. Install the drive belt idler pulley bracket bolts.

    Tighten: 

    Tighten the drive belt idler pulley bracket bolts to 30 N.m (22 lb ft) 

    Fig 1: Drive Belt Idler Pulley Bracket
    G01764707Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals