LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 598 (Engine Mechanical - 3.8L (On-Vehicle)) >> Repair Instructions >> Engine Mount Strut Bracket Replacement - Right Lower >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lower engine mount bracket to the exhaust manifold stud and the upper engine mount strut bracket.
  2. Install the lower engine mount strut bracket bolts.

    Tighten: 

    Tighten the lower engine mount bracket bolts to 50 N.m (37 lb ft) 

  3. Install the lower engine mount strut bracket nut.

    Tighten: 

    Tighten the lower engine mount bracket nut to 30 N.m (22 lb ft) 

  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals