LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 598 (Engine Mechanical - 3.8L (On-Vehicle)) >> Repair Instructions >> Drive Belt Replacement (L36) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift or rotate the drive belt tensioner using a 15-mm box end wrench on the pulley nut.
  2. Remove the drive belt.
    Fig 1: Drive Belt Tensioner (L36)
    G01764029Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals