LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 597 (Engine Mechanical - 3.1L V6 - VIN (J) Unit Repair) >> Repair Instructions >> Oil Pump Drive Installation

Oil Pump Drive Installation

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply prelube GM P/N United States 12345501, GM P/N Canada 992704 or the equivalent to the oil pump drive gear.
  2. Apply engine oil to the oil pump drive gear assembly for ease of assembly.
  3. Install the oil pump drive gear assembly.
  4. Install the oil pump drive gear clamp.
  5. Install the oil pump drive gear clamp bolt.

    Tighten: 

    Tighten the oil pump drive gear clamp bolt to 36 N.m (27 lb ft) 

    Fig 1: Oil Pump Drive Gear Clamp And Bolt
    G01763917Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals