LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 597 (Engine Mechanical - 3.1L V6 - VIN (J) Unit Repair) >> Repair Instructions >> Oil Pan Installation

Oil Pan Installation

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply sealer GM P/N United States 12345739, GM P/N Canada 10953541 or the equivalent to both sides of the crankshaft rear main bearing cap (1). Press sealer into gap using a putty knife.
    Fig 1: Applying Sealant
    G01763920Courtesy of GENERAL MOTORS CORP.
  2. Install the oil pan gasket.
  3. Install the oil pan.
  4. Install the oil pan bolts.

    Tighten: 

    Tighten the oil pan bolts to 25 N.m (18 lb ft) 

  5. Install the oil pan side bolts.

    Tighten: 

    Tighten the oil pan side bolts to 50 N.m (37 lb ft) 

    Fig 2: Oil Pan Bolts
    G01763921Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals