LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 597 (Engine Mechanical - 3.1L V6 - VIN (J) Unit Repair) >> Repair Instructions >> Exhaust Manifold Removal - Right

Exhaust Manifold Removal - Right

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the heated oxygen sensor.
    Fig 1: Heated Oxygen Sensor
    G01763724Courtesy of GENERAL MOTORS CORP.
  2. Remove the exhaust manifold heat shield bolts.
  3. Remove the exhaust manifold heat shields.
    Fig 2: Exhaust Manifold Heat Shield And Bolts, Right
    G01763725Courtesy of GENERAL MOTORS CORP.
  4. Remove the exhaust manifold nuts.
  5. Remove the exhaust manifold.
  6. Remove the exhaust manifold gasket.
  7. Remove the exhaust studs, if required.
    Fig 3: Exhaust Manifold Nuts, Gasket, And Studs, Right
    G01763726Courtesy of GENERAL MOTORS CORP.