LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 597 (Engine Mechanical - 3.1L V6 - VIN (J) Unit Repair) >> Repair Instructions >> Crankshaft Front Oil Seal Installation

Crankshaft Front Oil Seal Installation

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required: J 35468  Crankshaft Front Oil Seal Installer

  1. Align the J 35468 and the crankshaft front oil seal with the engine front cover and crankshaft.
  2. Install the crankshaft front oil seal using the J 35468 and a suitable tool.
    Fig 1: Crankshaft Front Oil Seal
    G01763916Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals