LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 591 (Rear Suspension System) >> Repair Instructions >> Shock Absorber Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Disconnect the electrical connector if equipped with Selectable Ride.
  3. Remove the upper shock absorber nut and the bolt. See Fig 1.
  4. Remove the lower shock absorber nut and the bolt.
  5. Remove the shock absorber.
    Fig 1: Removing Upper & Lower Shock Absorber Nuts & Bolts
    G00388765Courtesy of GENERAL MOTORS CORP.