LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Automatic Transmission Diagnosis - 4L80-E) >> Removal & Installation >> Transmission Internal Wiring Harness >> Installation

Transmission Internal Wiring Harness: Installation

WARNING: This page is about a different car, the 2002 GMC Yukon XL, 2002 GMC Sierra, 2002 Chevrolet Suburban, and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wiring harness assembly into the case.
  2. Connect the wiring harness assembly to the electrical components.
  3. Place the wiring harness assembly under the wiring harness clamps.
  4. Install transmission oil pan. See appropriate AUTOMATIC article in TRANSMISSION SERVICING.
scientia non olet · About LEMON Manuals