LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 589 (Engine Mechanical - 2.2L) >> Removal And Installation >> Unit Repair Assembly >> Engine Front Cover And Oil Pump (Unit Repair) >> Installation

Engine Front Cover And Oil Pump (Unit Repair): Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install engine front cover and new gasket.
  2. Install long water pump bolt.

    Torque: 

    Water Pump Bolt: 25 N.m (18 ft-lbs) 

    Fig 1: Installing Engine Front Cover, New Gasket And Long Water Pump Bolt
    G01039672Courtesy of GENERAL MOTORS CORP.
  3. Install engine front cover bolts.

    Torque: 

    Front Cover-to-Block Bolts: 25 N.m (18 ft-lbs) 

    Fig 2: Installing Engine Front Cover Bolts
    G01039673Courtesy of GENERAL MOTORS CORP.
  4. Install accessory drive belt tensioner.

    Torque: 

    Drive Belt Tensioner Bolt: 45 N.m (33 ft-lbs) 

    Fig 3: Installing Accessory Drive Belt Tensioner
    G01039674Courtesy of GENERAL MOTORS CORP.