LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 589 (Engine Mechanical - 2.2L) >> Removal And Installation >> Unit Repair Assembly >> Engine Flywheel (Unit Repair) >> Installation

Engine Flywheel (Unit Repair): Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Ensure that the correct bolts are used when installing manual transaxle flywheel or automatic transaxle flexplate. If the incorrect bolts are used, powertrain damage may result.
  1. Install flywheel.
  2. Install new bolts.
  3. Holding flywheel with Flywheel Holding Tool J43653, tighten bolts evenly.

Torque: 

Flywheel Bolt: 53 N.m (39 ft-lbs) + 25° 

Fig 1: Installing Flywheel
G01039695Courtesy of GENERAL MOTORS CORP.