LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 586 (Air Bag System) >> Removal & Installation >> Seat Belt Buckle PRETENSIONER & Switch Assembly >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove appropriate front seat. See FRONT SEAT  . Disconnect seat belt buckle pretensioner and switch electrical connector. Remove bolt and seat belt buckle pretensioner and switch assembly. See Fig 1 .
  3. To install, reverse removal procedure. Tighten seat belt buckle pretensioner and switch mounting bolt to specification. See TORQUE SPECIFICATIONS  . Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
Fig 1: Identifying Seat Belt Buckle Pretensioner & Switch Assembly
G99B29737Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals