LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the stabilizer shaft link nut from the stabilizer shaft link (1) and the stabilizer shaft (2).
    Fig 1: Removing/Installing Stabilizer Shaft Link Nut
    G00379283Courtesy of GENERAL MOTORS CORP.
  3. Remove the stabilizer shaft link nut from the stabilizer shaft link (1) and strut. See Figure.
  4. Remove the stabilizer shaft link (1) from the vehicle.
scientia non olet · About LEMON Manuals