LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 585 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer shaft insulator (2) to the stabilizer shaft.
  2. Install the stabilizer shaft insulator bracket (3).
  3. Install the stabilizer shaft bracket nuts. Tighten the bolts to 48 N.m (35 ft lbs).
  4. Lower the vehicle.