LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Engine Cooling System) >> Removal And Installation >> Heater Outlet Hose - L81 >> Installation

Heater Outlet Hose - L81: Installation

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install heater outlet hose to auxiliary coolant pump inlet. Position clamp at 5 o'clock.
  2. Lower vehicle.
    Fig 1: Installing Heater Outlet Hose To Auxiliary Coolant Pump Inlet
    G01041298Courtesy of GENERAL MOTORS CORP.
  3. Install heater outlet hose to heater core outlet pipe.
  4. Install clamp at 9 o'clock position.
  5. Connect negative battery cable.

    Torque: 

    Battry Terminal Bolt: 17 N.m (13 ft-lbs) 

  6. Fill cooling system.
    Fig 2: Installing Heater Outlet Hose To Heater Core Outlet Pipe
    G01041299Courtesy of GENERAL MOTORS CORP.