LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 583 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator >> Installation

Stabilizer Shaft Insulator: Installation

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer shaft insulator to the stabilizer shaft. See Figure.
  2. Install the stabilizer shaft insulator bracket.
  3. Install the stabilizer shaft bracket nuts. Tighten the bolts to 48 N.m (35 lb ft).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals