LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 578 (Rear Suspension System) >> Rear Shock Absorber >> Rear Shock Absorber Inspection

Rear Shock Absorber Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front shock absorber.
  2. Inspect for damage and oil leakage.
  3. Compress and extend the shock absorber piston rod at least three times at a steady rate. From the fourth compression stroke, verify that the operational force does not change and that there is no unusual noise.
    • If there is any malfunction, replace the shock absorber.
scientia non olet · About LEMON Manuals