LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 578 (Rear Suspension System) >> Rear CROSSMEMBER >> Rear Crossmember Removal/Installation >> Rear Crossmember Removal Note

Rear Crossmember Removal Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING: Verify that the crossmember is securely supported by a jack. If the rear crossmember falls off, it can cause serious injury or death, and damage to the vehicle.
  1. Support the rear crossmember with the jack and remove the bolt. See Figure.
  2. Remove the rear crossmember.
scientia non olet · About LEMON Manuals