Rear Lateral Links And Trailing Arms Replacement (Rear): Installation
WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear lateral link. Push the bolt forward into the link.
- Install the link nut at the rear suspension support. Tighten the rear lateral link to suspension support bolt to 120 N.m (89 lb ft).
- Install the link to knuckle bolt, the washer and the nut. Tighten the lateral link to knuckle nut to 100 N.m (74 lb ft).
- Install the tire and wheel. Adjust the rear wheel alignment. Refer to MEASURING WHEEL ALIGNMENT in WHEEL ALIGNMENT .