LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 575 (Rear Suspension System) >> Repair Instructions >> Coil Spring Replacement - AWD >> Removal

Coil Spring Replacement - AWD: Removal

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the spring and shock absorber assembly. Refer to SHOCK ABSORBER REPLACEMENT - AWD .
  2. Use the J 45400 or equivalent, in order to compress the spring. See Figure.
  3. Use a wrench in order to hold the piston rod. Remove the upper nut.
  4. Remove the shock absorber upper insulator retainer (9).
    Fig 1: Identifying Shock Absorber Components (AWD)
    G00370999Courtesy of GENERAL MOTORS CORP.
  5. Remove the shock absorber upper insulator (8).
  6. Remove the shock absorber upper mount (7).
  7. Remove the shock absorber lower insulator (6).
  8. Remove the spring upper insulator (2).
  9. Remove the spring compressor.
  10. Remove the spring (3).
  11. Remove the jounce bumper (5).
  12. Remove the shock absorber (4).
scientia non olet · About LEMON Manuals