LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 573 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the tire and wheel assemblies. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in TIRES AND WHEELS article.
  3. Remove the stabilizer shaft link nuts from the stabilizer shaft. See Figure.
  4. Remove the stabilizer shaft clamps, bolts and nuts retaining the shaft to the crossmember.
  5. Remove the stabilizer shaft from the vehicle.
scientia non olet · About LEMON Manuals