LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Rear Suspension) >> Repair Instructions >> Stabilizer Shaft Replacement >> Removal

Stabilizer Shaft Replacement: Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
    NOTE: Hold the ball shaft secure with a TORX® bit, when removing the nut.
  2. Remove the stabilizer link to stabilizer bar nut.
  3. Remove the stabilizer bar clamp bolts.
  4. Disengage the stabilizer bar from the stabilizer link ball studs, while removing the stabilizer bar from the vehicle.
scientia non olet · About LEMON Manuals