LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Rear Suspension) >> Repair Instructions >> Stabilizer Shaft Replacement >> Installation

Stabilizer Shaft Replacement: Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the stabilizer in the vehicle, while positioning the links to the stabilizer bar.
    NOTE: Refer to FASTENER TIGHTENING SPECIFICATIONS .
  2. Install the stabilizer bar clamp bolts. Tighten the bolts to 70 N.m (52 lb ft).
  3. Install the stabilizer link to stabilizer bar nut. Tighten the nut to 63 N.m (46 lb ft).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals