LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Rear Suspension) >> Repair Instructions >> Knuckle Bushing Replacement - Upper >> Installation

Knuckle Bushing Replacement - Upper: Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the J-45265, install the upper control arm bushing into the knuckle assembly.
    NOTE: Refer to FASTENER NOTICE 
  2. Install the knuckle assembly into the upper control arm. Tighten the upper control arm to knuckle bolt to 160 N.m (118 lb ft).
  3. Install the tire and wheel.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals